Getting connected is easy. Click on the "
Connect Now" link and run the RDP file. You can also right click and save this to your computer for future use.
If you wish to change the configuration save ediapp.rdp to your machine then right click on the rdp file and select edit.
If you wish you can also click the Connect Now link above launch a session.
First Launch
The first time you double click ediapp.rdp from your local computer you'll see this warning.
Check the Box saying,
"Don't ask me again for remote connections to this computer."
Once you hit the connect button you will be asked for your credentials.
Type them as:
U: username@trans-soft.net
P: your password
Note how the
Domain: field changes to trans-soft.net
Modify the RDP File
The default settings in the ediapp.rdp file may not be suitable for your PC.
To modify settings to better fit your screen resolution or turn drive mapping on or off
right click on the ediapp.rdp file and select
edit.
This will bring up Microsoft's RDC Client.
After making any changed to the default setting come back to the
General Tab and select
Save.
Most likely the only change you will need to make is on the
Display Tab. To get the best user experience move the
Remote Desktop Size slide to
Full Screen. This will open TS2000Plus maximized on your desktop and allow you to resize the application to a smaller size once opened.
Drive mapping can be turned on or off by going to the
Local Tab and clicking on
More...
Here you may check or uncheck the
Drives box to enable or disable drive mapping.
